© Eagle Ears Productions, LLC 2016

Elbo Tool & Accessories

Elbo Tool

The Elbo Tool's innovative design eliminates the drudgery and physical exertion associated with end grain vessel hollowing. It is one of the easiest hollowing tools to setup taking less than one minute. Compact but powerful, it readily attaches to any lathe without retaining bars or special hardware. One end clamps to your lathe's tailstock quill while the cutting arm slides over your tool rest. Three elbow-joint pivot points let you guide the cutter effortlessly. No more tense muscles or bone jolting rides as you hollow. Pull the cutting arm out of the tool holder section and you can insert your favorite 3/4" round shafted hollowing tool. You can also purchase separate adapters to allow you to use other diameter round shafted cutter tools.

Elbo Tool Available in Two Configurations!

Complete Elbo Tool - includes: clamp assembly, 2 pivot arms, 14" long -  3/4" round cutting arm,  and tool holder with 1/4" cutter. Recommended for lathes with beds 33” or longer. $250.00 NAKED Elbo Tool - The Elbo tool MINUS the 3/4" round cutting arm, and tool holder with 1/4" cutter. For those who already have 3/4" round boring bars from another hollowing system. $225.00 International orders please use the contact link above to inquire about international shipping. Buyer is responsible for duties, fees, taxes, etc. Mini-lathe & Short Bed Lathe Extension for Elbo Tool Until now, it's been nearly impossible to find a hollowing system for a mini-lathe. Elbo Tool brings to market a mini-lathe extension enabling you to use the famous Elbo Tool on your mini-lathe. It also works for full size short bed lathes with swings up to 22 inches. The Lathe Extension bolts to the bed of your lathe and provides an adjustable barrel mounted on a vertical shaft. The Elbo Tool bolts to this barrel allowing you to adjust for level on your lathe. $55.00

3/4" x 14" Round Hollowing Arm

Spare ¾” x 14” round hollowing arm for the Elbo Tool. Cutter clamp, screw and square cutter not included. $50.00
Naked Elbo Tool Elbo Lathe Extension
 x 14 Round Hollowing Arm
Turner's Laser Guide
Sizes
Tool arm adaptors Elbo Tool Cam Lock
Click images for larger photo
Complete Elbo Tool

The Original Elbo Tool

Designed by Stan Townsend the Elbo Tool changed hollowing from a chore to fun. No more complicated setups.  No extra add-ons to your lathe. No more giant bars and captive rests. Quick to setup using just your tailstock and tool rest. Stan has now passed the torch to Tim Yoder. Tim is honored to continue bringing one of the true hollowing innovations to you. If you are a past customer rest assured that you will still find the same support and expertise you found with Stan. If you are a new customer welcome to the best hollowing system you will ever own… the Elbo Tool! Made in Tulsa, Oklahoma       
Quantity
International orders please use the contact link above to inquire about international shipping. Buyer is responsible for duties, fees, taxes, etc.
Complete Elbo Tool
Naked Elbo Tool
Elbo Tool Cam Lock
Elbo Lathe Extension
¾” x 14” Round Hollowing Arm
Turner’s Laser Guide
¼”, ⅜”, ½” and ⅝” Adapters

Turner’s Laser Guide

The Turners Laser Guide enables you to know the location of a point on the cutting edge in real time even while the vessel is spinning and material is being removed. It utilizes a laser pointer to indicate the cutter position on the outside of the vessel while the cutter is actually inside the vessel and is otherwise impossible to accurately locate. With the stainless steel supports you can turn vessels 10" deep by 20" in diameter. The Turners Laser Guide Includes:1 Laser Pointer, 1 Thickness Gauge, 1 Universal Mounting Base, 1 Upright Support Arm, 1 90° Bi-directional Bracket, 1 Laser Support Arm, 1 Height Stop Ring and 1 AAA Battery  $80.00

Cutter Adapters

Now you can use any of your favorite cutting bars. Adapters are available for ¼”, ⅜”, ½” and ⅝” round bars. $20.00

Replacement Square Bar Cutter

Replacement 1/4" x 1/4" x 2 1/2" High Speed tool steel NOW with 5% Cobalt for a longer lasting edge. (square cutter bar only, clamp, screw and bar not included) Quantity discount below. $6.00

1” Round Smoothing Cutter

Mounts on the Elbo bar and smooths out marks left from hollowing. Tool steel that takes a great burr and lasts a long time. Comes pre-ground. Quantity discount below. $8.00

Hunter Carbide #2 Cutter Assembly

This carbide cutter removes wood at an incredible rate and is easy to control. Designed to work with the Elbo Tool standard clamp this replaceable # 2 Hunter Tool Cutter is inexpensive and will give you long tool life with outstanding finish cuts prior to any sanding operations. Simply remove the square Elbo cutter bar and insert the Hunter Tool Cutter in its place. Never needs sharpening, just rotate the tool slightly before each use. When the cutter eventually grows duller simply replace it with another cutter. $69.00

Hunter Carbide #2 Replacement Cutter

This is a replacement carbide cutter for the Hunter #2 Cutter Assembly. $20.50

Hunter Carbide #2 Replacement Screw

This is a replacement screw for the Hunter #2 Cutter Assembly. $4.00

Hunter Carbide #2 Replacement Wrench

This is a replacement Wrench for the Hunter #2 Cutter Assembly. $7.00
Replacement Square Bar Cutter
1” Round Smoothing Cutter
Hunter Carbide #2 Cutter Assembly Hunter Carbide #2 Replacement Cutter Hunter Carbide #2 Replacement Screw Hunter Carbide #2 Replacement Wrench
Hunter Carbide #2 Cutter Assembly
Hunter Carbide #2 Replacement Cutter
Hunter Carbide #2 Replacement Screw
Hunter Carbide #2 Replacement Wrench
Quantity
© Eagle Ears Productions, LLC 2016

Elbo Tool & Accessories

Elbo Hollowing Tool

The Elbo Tool's innovative design eliminates the drudgery and physical exertion associated with end grain vessel hollowing. It is one of the easiest hollowing tools to setup taking a little over one minute. Compact but powerful, it readily attaches to any lathe without retaining bars or special hardware. One end clamps to your lathe's tailstock quill while the cutting arm slides over your tool rest. Three elbow-joint pivot points let you guide the cutter effortlessly. No more tense muscles or bone jolting rides as you hollow. Pull the cutting arm out of the tool holder section and you can insert your favorite 3/4" round shafted hollowing tool. You can also purchase separate adapters to allow you to use other round shafted cutter tools.

Elbo Tool Available in Two

Configurations!

Complete Elbo Tool - includes: clamp assembly, 2 pivot arms, 14" long -  3/4" round cutting arm,  and tool holder with 1/4" cutter. Recommended for lathes with beds 33” or longer. $250.00 NAKED Elbo Tool - The Elbo tool MINUS the 3/4" round cutting arm, and tool holder with 1/4" cutter. For those who already have 3/4" round boring bars from another hollowing system. $225.00 International orders please use the contact link above to inquire about international shipping. Buyer is responsible for duties, fees, taxes, etc.

Mini-lathe & Short Bed Lathe Extension

for Elbo Tool

Until now, it's been nearly impossible to find a hollowing system for a mini-lathe. Elbo Tool brings to market a mini-lathe extension enabling you to use the famous Elbo Tool on your mini-lathe. It also works for full size short bed lathes with swings up to 22 inches. The Lathe Extension bolts to the bed of your lathe and provides an adjustable barrel mounted on a vertical shaft. The Elbo Tool bolts to this barrel allowing you to adjust for level on your lathe. $55.00

3/4" x 14" Round Hollowing Arm

Spare ¾” x 14” round hollowing arm for the  Elbo Tool. Cutter clamp, screw and square cutter not included. $50.00
Elbo Tool
 x 14 Round Hollowing Arm

Turners Laser Guide

The Turners Laser Guide enables you to know the location of a point on the cutting edge in real time even while the vessel is spinning and material is being removed. It utilizes a laser pointer to indicate the cutter position on the outside of the vessel while the cutter is actually inside the vessel and is otherwise impossible to accurately locate. With the stainless steel supports you can turn vessels 10" deep by 20" in diameter. The Turners Laser Guide Includes:1 Laser Pointer, 1 Thickness Gauge, 1 Universal Mounting Base, 1 Upright Support Arm, 1 90° Bi-directional Bracket, 1 Laser Support Arm, 1 Height Stop Ring and 1 AAA Battery  $80.00

Cutter Adapters

Now you can use any of your favorite cutting bars. Adapters are available for ¼”,  ⅜”, ½” and ⅝” round bars. $20.00

Replacement Square Bar Cutter

Replacement 1/4" x 1/4" x 2 1/2" High Speed tool steel NOW with 5% Cobalt for a longer lasting edge (square cutter bar only,  clamp, screw and bar not included). Quantity discount below. $6.00

1” Round Smoothing Cutter

Mounts on the Elbo bar and smooths out

marks left from hollowing. Made from tool 

steel that takes a great burr and lasts a

long time. Comes pre-ground. Quantity

discount below.

$8.00

Hunter Carbide #2 Cutter

Assembly

This carbide cutter removes wood at an incredible rate and is easy to control. Designed to work with the Elbo Tool standard clamp this replaceable # 2 Hunter Tool Cutter is inexpensive and will give you long tool life with outstanding finish cuts prior to any sanding operations. Simply remove the square Elbo cutter bar and insert the Hunter Tool Cutter in its place. Never needs sharpening, just rotate the tool slightly before each use. When the cutter eventually grows duller simply replace it with another cutter. $69.00

Hunter Carbide #2 Replacement

Cutter

This is a replacement carbide cutter for the Hunter #2 Cutter Assembly. $20.50

Hunter Carbide #2 Replacement

Screw

This is a replacement screw for the Hunter #2 Cutter Assembly. $4.00

Hunter Carbide #2 Replacement

Wrench

This is a replacement Wrench for the Hunter #2 Cutter Assembly. $7.00 International orders please use the contact link above to inquire about international shipping. Buyer is responsible for duties, fees, taxes, etc.
Laser guide
, ⅜,  and ⅝ Adapters
Sizes

The Original Elbo Tool

Designed by Stan Townsend the Elbo Tool changed hollowing from a chore to fun. No more complicated setups. No extra add-ons to your lathe. No more giant bars and captive rests. Quick to setup using just your tailstock and tool rest. Stan has now passed the torch to Tim Yoder. Tim is honored to continue bringing one of the true hollowing innovations to you. If you are a past customer rest assured that you will still find the same support and expertise you had with Stan. If you are a new customer welcome to the best hollowing system you will ever own…the Elbo Tool!
Square Bar Cutter 1 Round Smoothing Cutter
Quantity
Elbo Tool
Elbo  Tool
Elbo Tool
Complete Elbo Tool
Complete Elbo Tool
Naked Elbo Tool
Naked Elbo Tool
Elbo Lathe Extension
¾” x 14” Round Hollowing Arm
Laser guide
¼”, ⅜”, ½” and ⅝” Adapters
Square Bar Cutter
1” Round Smoothing Cutter
Hunter Carbide #2 Cutter Assembly Hunter Carbide #2 Replacement Cutter Hunter Carbide #2 Replacement Screw Hunter Carbide #2 Replacement Wrench
Hunter Carbide #2 Replacement Cutter
Hunter Carbide #2 Cutter Assembly
Hunter Carbide #2 Replacement Screw
Hunter Carbide #2 Replacement Wrench
Quantity